The following instructions describe how
to creating a new dial-up connection to freerange
NOTE: You will need your NT4 installation media (probably
a CD) to complete this installation.
|
1 |
The first thing you have
to do is install Dial-up Networking. To do this, double
click the 'My Computer' icon on your desktop. |
|
2 |
Double click the 'Dial-up
Networking' icon within the window that opens up. |
|
3 |
You should click 'Install'
on this window. |
|
4 |
Once Dial-up Networking
is installed you will be presented with a warning that
the phone book is empty. Click 'OK' |
|
5 |
Type in a phonebook name
such as 'freerange'. Click 'Next'. |
|
6 |
On this screen you should
have to tick all three tickboxes, click 'Next'. |
|
7 |
Type in 0844 535 2133
into the 'Telephone number box' and leave 'Use Telephony
dialing properties' unchecked. Click 'Next'. |
|
8 |
On this screen, select
'Point-to-Point Protocal (PPP)' and click 'Next'. |
|
9 |
On this screen, select
'None'. Click 'Next'. |
|
10 |
On this screen, leave
'My IP address' as 0's. Click 'Next'. |
|
11 |
On this screen, leave
'DNS server' and 'WINS server' as 0's. Click 'Next'. |
|
12 |
Click 'Finish' on this
screen. |
|
13 |
On the next screen, click
'More' and select 'Edit entry and modem properties'. |
|
14 |
Select the 'Server' tab
at the top of the window. |
|
15 |
Select 'PPP: Windows NT,
Windows 95 Plus, Internet' from the 'Dial-up server type'.
Select 'TCP/IP' and leave all other boxs unchecked. Click
'Next'. |
|
16 |
On this screen, select
'Server assigned IP address' and 'Server assigned name
server addresses'. All fileds will contain 0's and the
bottom two options must be selected. Click 'OK' to each
of the open windows until you are back to step '13' |
|
17 |
On this screen click 'Dial' |
|
18 |
On this final screen,
type in your 'username' (freerange) and your 'password'
(freerange) and select the 'Save password' box and click 'connect'.
You will now be connected to your freerange connection.
|
